Hollyland LARK 150 2-Person Digital Wireless Mic System

Hollyland LARK 150 2-Person Digital Wireless Mic System

Vlog with the black Hollyland LARK 150 2-Person Digital Wireless Mic System The Hollyland LARK 150 2-Person Digital Wireless Mic System features two ultra-compact microphone transmitters and a receiver

The tiny transmitters feature built-in omnidirectional microphones and weigh less than 1 oz each, making them easy to clip onto shirts and lapel collars for quick interviews. The integrated mics offer an anti-vibration design with intelligent noise cancellation to ensure outstanding sound quality and clear, intelligible audio. For a more discreet appearance, you can use the included Lavalier microphones and plug them into the 3.5mm input ports on the transmitters. The transmitter’s power button doubles as a two-way mute button with a short press.

The two-channel receiver clips to your camera shoe and features easy-access volume knobs, a 3.5mm headphone monitoring output, a 3.5mm line output, and an easy-to-read OLED screen that shows the connection and battery status of all three units along with metering for audio levels.

The Hollyland LARK 150 2-Person Digital Wireless Mic System uses automatic frequency selection with FHSS (Frequency Hopping Spread Spectrum) technology in the 2.4 GHz bandwidth to ensure a clean signal without interference or dropouts at a range of 328′ line of sight and 65′ with limited obstacles. The receiver also supports switchable safety, stereo, and mono modes for different configurations and a low latency rate of 5ms.

Both the transmitters and the receiver feature built-in rechargeable batteries. The transmitters will each run up to 4 hours, while the receiver offers up to 7.5 hours of operating time; this means that for single-person shoots, the second transmitter can be used to extend your shooting time if necessary. The included storage and transport case automatically pairs the components and recharges them in 2.5 hours using its USB input port.

A USB cable, 3.5mm TRS audio cable, 3.5mm TRRS cable, two furry windscreens for the lavalier mics, and a storage bag are also supplied with the Lark 150. The system can be expanded with additional transmitters and receivers (available separately) to accommodate up to 8 wireless mics on set at one time.

Professional Sound Quality

The built-in high-sensitivity omnidirectional microphone on transmitters for quick on-the-fly interviews

Anti-vibration sound chamber design

DSP (Digital Signal Processing) intelligent noise cancellation

Two Lavalier microphones with furry windscreens included for visually discreet setups

Stable Wireless Audio Transmission

328′ line-of-sight operating range with a 5ms latency

The power-On Smart Frequency selection feature automatically finds an open frequency in the 2.4 GHz spectrum

The Frequency Hopping Spread Spectrum (FHSS) method hops between available frequencies for optimal wireless transmission

Mono/Stereo/Safety Output Modes

• Mono: Record a single microphone to both audio tracks in your camera or phone
• Stereo: Record two mics, with each on a separate track
• Safety: Record a single mic at a lower level on a separate track as a backup if the main track is too loud

Ultracompact Construction

Small and light transmitters weigh less than 1 oz

The charging case supports fast auto-pairing, upgrade, and storage for the whole system

Additional Features

The power button doubles as a two-way mute

Real-time audio monitoring with 3.5mm headphone output on the receiver

3.5mm line output on the receiver with included TRS cable for camera and TRRS cable for smartphone or mobile device with 3.5mm input jack